XR6T Billet Fuel Rail

To compliment our fuel tube system we have developed this dual entry fuel rail system.
When using 2 x 044 pumps with the factory fuel rail and pressure regulator, we have found that the factory fuel pressure regulator can not keep the rail pressure low enough at light load and cruise speeds.

The answer to this problem, is the new Process West dual entry fuel rail with Turbosmart FPR 1200 regulator.

The new Process West Fuel rail has the following features:
*CNC machined from 6061T6 aluminum extrusion
* 2 x -8 inlet and 1 x -8 outlet
* will fit with the stock plenum, PW throttle body relocation kit, PW plenum and all other aftermarket plenums.

Pic below shows the Process West Fuel Rail itself

Pics below shows Fuel Rail installed onto Factory FG Manifold

Process West's Unique FG Billet Fuel Rail mounting system, allows the use of standard height injectors ,
as well as aftermarket longer injectors.

The fuel rail is available on its own for those customers who wish to plumb up all the fuel line themselves,
or can be purchased along with a complete “fitting kit” .

The "fitting kit" includes all Speedflow fittings and fuel hose required, along with the Turbosmart FPR 1200 regulator.

This pic below shows the Fuel Rail and “fitting kit” .

Watch this space for further updates and pics of installations.

www.processwest.com.au - www.jblchargeair.com - www.wrxparts.com.au

Contact Kevin Westblade - sales@processwest.com.au

PO Box 611 Unanderra NSW Australia 2526
Ph. +61 2 42 728088 - Fax. +61 242 577940 - Mob. 0400 777 111

Updated February 19, 2010