XR6 Turbo Battery Relocation Kit

Our battery relocation kit has been developed to move the existing battery from the factory position to give clearance for large air box installations.

Our unique system re-locates the existing battery, mounting it behind the factory foglight area on the drivers side of the car. The reason this position was chosen was to keep the battery cables as short as possible, as long cables cause high voltage drop and poor starting performance.

The installation of the system is very simple and does not require cutting of any cables. You simply install the new laser cut battery tray and bracket, and mount the new plastic battery terminal distribution block (high density P7000) then connect the cables.

New mounting position of the battery

New distribution block in place.
The method of extending the battery cables means no cutting and still gives easy access for jump starting/charging if needed.

P7000 block

www.processwest.com.au - www.jblchargeair.com - www.wrxparts.com.au

Contact Kevin Westblade - sales@processwest.com.au

PO Box 611 Unanderra NSW Australia 2526
Ph. +61 2 42 728088 - Fax. +61 242 577940 - Mob. 0400 777 111

Updated August 12, 2010