XR6T Fuel Tube

Following on from our very successful single pump anti-surge system, sees the release of our twin 044 Process West Fuel Tube
and dual entry fuel rail system.

The original single pump system will support approx. 400rwkws (on pump fuel).

Higher than this power level, the single pump struggles to keep fuel pressure at high loads.

With many of our customers now exceeding this power level, the need for a complete bolt in high HP fuel supply was required.

The solution is now here.

The new Process West Fuel Tube has the following features:

* 2 x Bosch Motorsport “044” fuel pumps…rated at 700hp each
* hi capacity 3.2 litre anti-surge fuel tube
* system is totally suspended/mounted on 6 rubber isolation blocks. Even with 2 pumps running the system is whisper quiet.
* installation is a simple bolt in
* Australian made Speedflow fitting used through out
* optional plug-in wiring harness

Pic below shows basic Process West Fuel Tube system including twin fuel pumps

Pic below shows components of complete Process West Fuel Tube system including twin fuel pumps

Pics above and below shows the Process West Fuel Tube system mounted underneath car

Pic below shows optional Process West Fuel Tube wiring harness

www.processwest.com.au - www.jblchargeair.com - www.wrxparts.com.au

Contact Kevin Westblade - sales@processwest.com.au

PO Box 611 Unanderra NSW Australia 2526
Ph. +61 2 42 728088 - Fax. +61 242 577940 - Mob. 0400 777 111

Updated February 9, 2010